4garden.co.uk classic gazebos

gazebos
The gazebos are designed and manufactured to the highest standards in order to provide a pleasing and attractive area of shade for the garden.
Available in two sizes and two colours - biege or green the 260 pvc coating fabric has been used for extra water proofing and stain repellent.
The stiching on the material has been seam taped for maximum strength.
All gazebos are constructed with 32mm dia steel poles (38mm dia for 6 x 3m) by 1mm gauge with epoxy coating which are used for utimate sturdiness and structure.
Instead of the plastic corner joints normally used, steel joints are used along with push fit spring loaded fixings for easy construction.

seam taped joints
The stiching on the material has been seam taped for maximum strength.

kit of parts
All Gazebos come complete with Tent pegs,feet pegs, full set of side curtains, guy ropes,curtain rings and carry bag.

corner joints
Steel corner joints for extra strength

side curtains
All Gazebos come complete with a full set of sliding side curtains

green or beige colour
All Gazebos are available in either green or biege

assembly story (click back button, after photos)
I have written this story to demonstrate the quality of this gazebo & help you decide whether this product is for you ! I unpacked the box & laid out the contents photo 1 , you can see from this next photo the quality of the tubular steel brackets photo 2 . Although i erected this gazebo in approximately 1 hour myself, 2 people are recommended. There are assembly instructions in english, all the poles are marked with numbers that relate to the assembly diagram. The first step is to build the roof structure, starting with the perimeter poles. The poles slot & are held togther with "push fit spring loaded fixings", the corner brackets are all steel (not plastic) photo 3 , photo 4 here is the roof hip assembly in detail photo 5 . After the roof frame is built, the legs are attached one by one (this is where it is handy to have 2 people) photo 6 , now the frame is complete photo 7 . The roof covering is slipped over the roof frame & creates an attractive eaves overhang. The roof is held in place by pulling the roof pockets over the ends of the roof poles, elasticated pockets make this easy, in between the poles velcrow straps wrap around the horizontal poles photo 8 . To make the walls more weather tight & to give the poles an aesthetic cover, each pole has a triangular cover fixed with velcrow at the top & elastic at the bottom photo 9 , here is the top detail photo 10 . Wall sheets are provided to all sides and are secured with "shower curtain type" plastic clips, allowing the walls to be easily pulled open photo 11 , guy ropes are secured to each pole adding to the stability photo 12 , here are 2 photos of the walls pulled back to create the doorway into the gazebo photo 13 , photo 14 . Now the job is complete, here with a doorway open photo 15 , here with it closed photo 16 . Thats now all you need to do is buy one !